Rifle Bullet Feeder 22 Cal.
Item #095340 | U.S. Patent: 9,267,775The Lock-N-Load® Rifle Bullet Feeder is designed for the Lock-N-Load® AP™ reloading press.
Sold as a complete unit for 22 caliber bullets, a conversion kit for 30 caliber bullets is also available, giving the reloader the versatility to load the two most popular calibers. Plus, it’s compatible with other presses and uses the industry standard 7/8"-14 die threads.

Turn your progressive reloading press into a bench-mounted ammo factory!

Coupled with the Lock-N-Load® Case Feeder, you’ll realize dramatic increases in efficiency and reloading speed — up to 50% faster (based on experience and proficiency).
The Bullet Feeder Die is case activated; the bullet will only feed upon contact with the case. A single station is used to feed, seat and crimp the bullet.
Note: The Rifle Bullet Feeder System must be purchased separately from the Hornady® Pistol Bullet Feeder because the hopper systems and die bodies are not compatible. Cast lead bullets cannot be used in any Hornady® bullet feeders.
See the Lock-N-Load® Case Feeder
Bullet Feeder Dies
The bullet feeder die is case activated which means the bullet will only feed upon contact with a case. The collets are made of solid steel and durable enough for years of reloading.
U.S. Patent: 8,276,494

30 Caliber Conversion Kit
Item #095345 | U.S. Patent: 9,267,775The 30 caliber conversion kit will accommodate cartridge sizes from 300 Savage through 300 Rem Ultra Mag.
Find the right dies & accessories to complete your reloading project.
- Dies & Die Accessories
- Case Feeder Plates
- Bullet Puller Collets
- Trimmer Pilots
- Shell Holders & Shell Plates
- Primer Punch

How Lock-N-Load® Works
The Hornady® Lock-N-Load® System is as Easy as 1-2-3
- Insert the Lock-N-Load® die bushing into the press bushing and lock it into place with a twist. The six locking lugs on the die and press bushings will hold it securely in position.
- Insert your standard die with 7/8"-14 threads into the Lock-N-Load® bushing.
- Adjust the die to the proper position and lock your setting into the place with Hornady's unique Sure-Loc™ lock ring.
To change calibers, simply twist the die counterclockwise, remove die and insert your next preset Lock-N-Load® die and bushing. Because they remain locked in their Lock-N-Load® bushings, your dies will remain exactly as you set them. The positive locking action of the Lock-N-Load® bushings holds the dies in rock solid, perfect alignment.