Photo of Powder Measure

Product Features

Largest charge range in the industry

By simply changing rotor and inserts, you can use one Lock-N-Load® Powder Measure to load powders and charges from .5 grain to 265 grains.

Multiple mounting methods

Mount to your bench using a standard mounting bracket and lock ring, or use our Lock-N-Load® bushings to mount this versatile measure on the Fast Load Powder Measure Stand.

Push-button release function

To change metering inserts, simply push the release button and change over to another metering insert. Verify the new charge and you're reloading again right away. Inserts can be swapped in seconds. Go from reloading 30-06 to 45 Auto in no time. Keep the preset inserts with your die sets.

Adjustable tension

The O-ring on the metering insert adjustment lets you put a slight amount of tension on the metering unit to make fine, incremental adjustments. Once you've set your charge, tighten the lock ring to secure the setting.

Precision tolerance

With only .002" clearance between the drum and rotor, it's the tightest in the industry for a standard measure. This tight tolerance helps eliminate powder binding between the frame and drum, delivering smooth function with all types of propellant – extruded or ball.

Small and large drop tubes

These tubes speed up powder flow. Two drop tubes are included for .204 to 45 caliber. Use the largest drop tube that fits the case mouth. An optional extended drop tube is also available. Optional 17 caliber drop tube sold separately. (No. 390709)

Metering Inserts

Pistol Rotor and Standard Pistol Metering Insert

For use in your Lock-N-Load® Powder Measure, this pistol rotor features a smaller chamber for more precise metering of charge weights between .5 and 17 gr.

Photo of Pistol Rotor and Standard Pistol Metering Insert

Pistol Rotor and Standard Pistol Metering Insert

Item #050128
Photo of Standard Pistol Metering Insert for Pistol Rotor

Standard Pistol Metering Insert for Pistol Rotor

Item #050116

Powder Measure Metering Inserts

Switch these metering units in and out of your Lock-N-Load® Powder Measure with just a push of a button. (Not compatible with the Bench Rest Grade or Black Powder Measure.)

Photo of Standard Metering Unit Insert

Standard Metering Unit Insert

Item #050120

Meters from 15 to 100 grains of powder.
(Included with Lock-N-Load® Powder Measure)

Photo of Powder Measure Drain Insert

Powder Measure Drain Insert

Item #050125

Replaces a metering insert so you can drain powder without removing the measure from its stand.
(Compatible with Bench Rest Grade Powder Measure.)

Find the right dies & accessories to complete your reloading project.

  • Dies & Die Accessories
  • Case Feeder Plates
  • Bullet Puller Collets
  • Trimmer Pilots
  • Shell Holders & Shell Plates
  • Primer Punch / Decapping Pins
View Sizing Charts
Photo of High Capacity Metering Kit

High Capacity Metering Kit

Item #050126

The kit's two metering units have capacities of 80 to 180 grains and 165 to 265 grains of powder, and come with the clear drop tube and large hopper tube.

The clear drop tube visually ensures a complete powder drop and the extended hopper tube allows you to reload more rounds between refills of powder. Fits Hornady® Lock-N-Load® Powder Measure.